Q32 series caterpillar shot blasting machine
DATE:2017/07/20 FROM:未知 AUTHOR:互嘉
Product specification: Q326, Q3210, QR3210
Product category: shot blasting machine, Q32 track shot blasting machine
Product Description: this series is suitable for surface cleaning, rust removing and shot blasting strengthening of various kinds of medium and small castings, forgings and machined parts. It is suitable for different production scale, can use single or multi Taiwan, matching with the continuous conveyor composed of clean production line. It is the ideal cleaning equipment for large, medium and small cleaning workpieces. Q32 series crawler shot blasting machine has the advantages of advanced design, reasonable structure, low energy consumption, high efficiency and so on.
This machine is a new product designed and developed at home and abroad. It is a kind of cleaning equipment with high efficiency, compact structure, small noise and complete set. The machine has the following characteristics:
The 1.Q32 crawler shot blasting machine adopts the cantilever centrifugal shot blasting machine, which has the characteristics of long service life and simple structure.
2.Q32 crawler blasting machine adopts BE separator, which has good separation effect and higher productivity, and has positive effect on improving blade.
3.Q32 crawler shot blasting machine adopts bag type dust collector, and the dust emission concentration is lower than the standard stipulated by the state, which greatly improves the working environment of the operator.
4.Q32 tracked shot blasting machine adopts wear-resistant rubber track, which reduces the impact and damage to the workpiece and reduces the noise of the machine.
Q32 series is made of high strength wear-resistant rubber track or manganese steel track, and the workpiece is thrown on the track by the shot blasting machine to achieve the goal of cleaning. It is mainly suitable for the casting, forging, aluminum parts, stainless steel parts, copper parts and other small and medium-sized workpiece cleaning. The room layout and blasting machine through computer simulation to determine the three-dimensional dynamic projection, the coverage area of the pill flow accurately covering the surface of the workpiece, the workpiece from all directions and thrown to the surface of the workpiece; the wear-resistant steel rubber track, reduce the collision, reduce the damage of the workpiece phenomenon. The noise of the machines. The winnowing separator has a good separation effect and high productivity, reduce the wear parts (such as blast blade wear); the use of bag type dust collector, dust emission concentration is lower than the national standard, improve the working environment; the workpiece cleaned up, the crawler can realize automatic unloading reversal. No pit form of the highly popular, saves the construction cost of the foundation pit.
This machine is suitable for surface rust removal or shot blasting strengthening in many kinds, large and medium batch production. Cleaning the workpiece must be not afraid of collision, single focus on the following 150kg castings and heat treatment parts, the production of Q32 crawler shot blasting machine has the following advantages:
1, using high speed projectile LUOSIl Germany's cantilever centrifugal impeller device technology, can greatly improve the cleaning efficiency, good cleaning quality, long service life, simple structure, low failure rate.
2, the room layout and blasting machine through computer simulation to determine the three-dimensional dynamic projection, the coverage area of the pill flow accurately covering the surface of the workpiece, the workpiece from all directions and thrown to the surface of the workpiece, to ensure that the workpiece processing after leaving any dead.
3, the wear resistant steel rubber track, reduce the collision, the damage of the workpiece, the machine noise and vibration are small, dust bag or optional type cyclone dust collector, dust concentration reaches the national safety standards, reduce machine friction, long service life.
4, the product automation level is high, saves manpower, simultaneously uses the non earth hole pattern, reduces the enterprise expense
This type of shot blasting machine use are: suitable for many varieties, medium and large batch production of workpiece surface rust or shot peening, the high-speed rotation of the impeller of the machine, the projectile flipped to a drum of the workpiece, the purpose of cleaning up. The utility model is suitable for shot blasting, rust removing, surface removal and surface strengthening of small and small castings, forgings and stamping parts in various industries, and is especially suitable for the surface cleaning and strengthening of parts not afraid of collision. Casting after blast cleaning, easy machining surface under the machining process, not only can save processing time, but also can protect the machine and tools are not damaged; non machined surface paint, keep off, prolong the service life of the product quality and appearance.
This machine adopts an annular rubber track to form a working space, cleaning workpiece in rotary continuous flip track driven, the projectile in the role of blasting centrifugal force high speed continuous roll to throw workpiece on the track, in order to achieve the purpose of cleaning. This machine is suitable for sand cleaning, rust removing, place oxidation and surface strengthening of medium and small casting, forging, stamping parts, gears and springs. The use of tipping bucket automatic feeding and track automatic discharge can greatly reduce the labor intensity of workers. The new bag type dust collector makes the dust emission concentration lower than the national emission standard, and improves the working conditions.